Home > Products > Fiber Fence > Zone Type Fiber Intrusion Detection System > Fiber Optic Vibration Sensors
Raycom fiber optic vibration sensor is a complete sensing solution that starts at the point of measurement and ends by providing digital data and alarms. Our fiber optic vibration sensor is used for vibration, acceleration, pressure and temperature sensing. As with all of our products, it uses photons (i.e. light), which makes it intrinsically safe and can operate in many harsh environments.
The RF960-4 is a 4-zone Fiber Optic Intrusion Detection System designed to detect intrusions into the perimeters and borders on the basis of the principle of laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system. Furthermore, it has strong anti-disturb ability to eliminate environment nuisance alarms and can be immune to electromagnetic interference, lightning and storms.
The fiber optic vibration sensor is composed of RF960-4 host and several passive terminals. The host adopts 19 inch standard chassis, every two zones corresponds to an optical output interface and 2 optical input interfaces. By default, RF960-4 fiber optic vibration sensor supports 4 contact closure alarm outputs, the contact closure output can be extended and contact closure input can be also supported by choosing auxiliary card (declared before order). It is suitable for complex terrain, ammunition depots, ware houses, inflammable or explosive areas.
Pure photonics, intrinsically safe, suitable for a wide range of harsh environments
Embedded analytics and predictive maintenance capabilities
Monitor your core assets
Configurable digital outputs
Fiber optic cable: non-conductive, low loss, no repeaters required
Large acceleration and frequency range
19-inch standard chassis
Supports up to 4 zones
Optical fiber length extends up to 1000m
Utilizes normal optical fiber cable (GYXTW) suitable for installation on wire net or underground
Supports 4 contact closure alarm outputs; contact closure output can be extended, and contact closure input can also be supported by selecting an auxiliary card (needs to be specified before ordering)
Allows video linkage supervision
Detects climbing, cutting, and sabotage behaviors
Alarm response time is less than 3 seconds
Supports external 2G/3G/4G wireless modules for remote alarms
Easy installation, debugging, and supports remote parameter adjustment
Enables intrusion data replay
Allows parameter adjustment to filter nuisance alarms and prevent missing reports
Automatically adapts to changes in external conditions such as wind and rain
Includes ESD and surge protection circuits, making it immune to electromagnetic interference and lightning damage
Operates on a 220V AC/50Hz power supply with a power consumption of less than 8W
Ambient working temperature ranges from -40℃ to +70℃
Provides RFVIEW-W software offering a graphical interface for daily operation of the optical fiber fence
The passive terminals feature ABS engineering-plastics enclosures designed to be waterproof, pressure-resistant, corrosion-resistant, and withstand various weather extremes.
As shown in Figure 1, the fiber optic vibration sensor host, installed in the central office, located at one terminal of all zones. The 1 piece of 8 core fiber cable are deployed, extending to one direction one by one. Each cable connects can arrange four zones.
Figure 1 When optical fiber bus extends toward to one side
As shown in figure 2 shows, from the central office, the optical fiber buses extend toward to both sides. Each fiber cable can deploy 2 zones.
Figure 2 When optical fiber bus exited to both sides
In some application, we can use the connection with only one optical cable. It adopts one 8-core optical fiber cable, one RFM007-G, two RFM003-G, one RFM009-G and one RFM001-G.
Figure 3 Connection with only one optical cable