Home > Products > Fiber Fence > Zone Type Fiber Intrusion Detection System > RF960-32 Home Perimeter Security Systems
The home perimeter security system designed to detect intrusions into the perimeters and borders on the basis of the principle of laser interference. It adopts optical fiber vibration sensing technology, to detect and notify any intrusion attempt such as climbing, cutting sabotage the fence or disassembles the system. Furthermore, it has strong anti-disturb ability to eliminate environment nuisance alarms and can be immune to electromagnetic interference, lightning and storms.
The host adopts 19 inch standard chassis, every two zones corresponds to an optical output interface and 2 optical input interfaces. By default, home perimeter security system, the contact closure output can be extended and contact closure input can be also supported by choosing auxiliary card (declared before order). It is suitable for complex terrain, ammunition depots, ware houses, inflammable or explosive areas.
1. buried seismic sensors are installed along the perimeter to create a virtual fence around the property.
2. the detector is connected to the home alarm.
3. The detector analyzes real-time signals and searches for intrusion patterns.
4. Alerts from the seismic detector area are managed by the alarm system like any other motion detector.
Invisible and Vandal Resistant
Our seismic sensors are buried underground, invisible to intruders, and will not damage the aesthetics of your yard.
Because our sensors are located underground, it is very difficult for an intruder to disable our sensors.
Unaffected by environmental conditions: rain, fog, wind, day and night
Unlike traditional security systems, seismic technology provides an extra layer of security by detecting threats before they reach your doorstep.
Figure 1 When optical fiber bus exited to both sides
In some application, we can use the connection with only one optical cable. It adopts two 36-core optical fiber cable, two RFM007-G, sixteen RFM003-G, fourteen RFM009-G and two RFM001-G.
Figure 2 Connection with only one optical cable