Home > Products > Telecom Product > Compact PDH > Fast Ethernet and 4E1 multiplexer (RP102)

Fast Ethernet and 4E1 multiplexer (RP102)

RP102 is the compact and high-performance optical transmission equipment based on Application Specific Integrated Circuit (ASIC). It can realize the 4 E1s and a 100Mbps Ethernet data channel transmission over optical line.

Product Description

Overview       

   

RP102 is the compact and high-performance optical transmission equipment based on Application Specific Integrated Circuit (ASIC). It can realize the 4 E1s and a 100Mbps Ethernet data channel transmission over optical line.

With low power consumption, high integration and well stability, RP102 can be used point-to-point, or as the remote of RS7000/RS3000 (MSAP), it is a cost-competitive solution for the application such as the telecommunication, the electric power and the finance fields.

 

Feature 

 

  • Compact design with 1U height, and can be installed on standard rack
  • Realizes 4 E1s and a 100M wire-speed Ethernet mixed multiplexing to optical fiber
  • Optical interface
  • One optical interface, with the line bit rate of 155Mbps.
  • Provides optical loopback function, a great convenience for trouble shooting.
  • Supports remote power down information sending function.
  • E1 interface
  • Provides 4 E1 interfaces, 75Ω unbalanced, and BNC connector.
  • Jitter tolerance and jitter generation fully comply with ITU-T G.823 recommendations.
  • Supports device loop and E1 line loop for easy testing.
  • Ethernet interface
  • One copper fast Ethernet interface compliant with IEEE802.3 serial standard (RJ45).
  • Supports auto-negotiation, which can work in 100M full/half-duplex, 10M full/half-duplex mode.
  • Accepts frames with length between 64 and 2036 bytes (otherwise filtering).
  • Flow control ability in full duplex mode.
  • Auto MDI/MDX function.
  • Patent technique adopted for Ethernet loop detection.
  • Management
  •  Necessary alarm detection for fault location.
  •  Supports management by RS7000/RS3000.
  •  

Application

 

RP102 supports point-to-point application, as Figure 3-1 shows.

 

img1

 

Figure 1 Point-to-point Application

 

 

RP102 can be the remote of RS7000/RS3000 (MSAP equipment), as Figure 3-2 shows. The NMS can monitor and control all RP102 via RS7000.

Note:This application is only for the E1 traffic aggregation; Ethernet traffic aggregation is not supported.

 

 

img2

 

Figure 2 Remote Application

 

  • wechat

    Vivian: VivianMa2000

Chat with Us